Горелки газовые VALUPAK®
The MAXON VALUPAK® gas burner provides a convenient, packaged solution for direct fired heating applications in ovens and dryers. The burner fires cleanly into applications with balanced pressure where high turndown of over 40:1 is required for precise temperature control. Durable steel construction provides years of reliable service. VALUPAK® is available in wide variety of packaged forms to suit your application for a bolt-on solution.
Горелки газовые открытого типа STICKTITE™, PILOTPAK™, "SN"
STICKTITE™ and PILOTPAK™ Nozzles provide a value engineered solution for direct-fired air heating and/or open-port firing into a furnace, duct, or immersion tube. The single torch-like flame creates a venturi effect that pulls secondary air in around the gas burner nozzle and provides cooler operation of the cast metal nozzle.
Горелки газовые RadMax®
RadMax® Radiant Low NOx Burners are designed to deliver uniform, high intensity radiant energy for moisture removal in textile and paper ovens, paint drying, and powder coating, as well as many pre-heat, plastic forming, heat treating and annealing operations. With innovative ceramic or metal foam tiles, the RadMax® natural gas burner produces low to Ultra-Low NOx and CO levels for a wide variety of industrial gas burner applications.
Горелки газовые OVENPAK® LE
Four new sizes added for increased application flexibility - OPLE 5, 10, 70 and EB100
Горелки комбинированные OVENPAK® 500
The OVENPAK® 500 natural gas burner burns clean fuel gases, light oils, or both at the same time. This industrial burner provides clean combustion with low NOx levels while maintaining exceptional turndown for precise temperature control in a wide variety of processes which include ovens and dryers, paint finishing lines, grain dryers, paper and textile machines, coffee roasters, food baking ovens, and fume incinerators.
Горелки газовые OVENPAK® 400
MAXON's OVENPAK® 400 Series is the world's most flexible and reliable industrial burner. The OVENPAK® burns most any fuel gas and requires only low pressure fuel. This natural gas burner provides clean combustion with low NOx levels while providing unmatched turndown.
Горелки газовые OVENPAK II® 400
MAXON's OVENPAK II® 400 Series improves on the world's most flexible and reliable industrial burner by providing easier installation and extended accessories. The OVENPAK II® burns most any fuel gas and requires only low pressure fuel. This natural gas burner provides clean combustion with low NOx levels while providing unmatched turndown.
Горелки газовые OPTIMA™ SLS
- Extremely Clean, reliable heat with ultra Low NOx and CO production for ease of air permitting and environmental compliance
- Large capacity heat releases with a compact, robust flame geometry
- Intelligent ratio control for reliable operation and optimal fuel efficiency
- Direct factory operational support with optional communication gateway
- All steel and high temperature alloy construction for reduced weight and increased durability
- Fuel flexible with natural gas, propane, and butane capability. Contact MAXON for other fuels
- Configurable for dryers, air heaters, ovens, kilns, process heaters, paper machines, and a variety of other industrial h eating equipment
Горелки комбинированные MEGAFIRE®
The MEGAFIRE® Industrial burner cleanly burns #2 oil, propane, or natural gas with quiet operation and exceedingly low horsepower requirements. Standard heat releases are available to 45,000,000 BTU/hr (13,000 kW), providing excellent application flexibility. Dual fuel capability of this low temp burner provides reliable heat to kilns, dryers, process heaters as well as numerous other industrial applications.
Горелки газовые M-PAKT®
M-PAKT® Ultra low NOx Burner provides the world's lowest levels of NOx and CO while maintaining typical MAXON quality and reliability. In most applications, NOx is typically < 9 ppm while CO is maintained < 20 ppm. The M-PAKT® industrial burner is suitable for air heating for ovens and dryers for paint finishing, paper making, textile production, food baking, grain drying, and make-up air heating. M-PAKT® substantially reduces emissions in incinerators, oxidizers, heat exchangers and process heaters.
Горелки газовые LINOFLAME®
MAXON's style A, B & C LINOFLAME® Industrial Burners produce short, ribbon-type flames by modular-designed section with customized drillings. Our type "VF" LINOFLAME® Gas Burners are cast iron, V-faced, modular sections incorporating standardized drillings for interchangeability. Maxon LINOFLAME® Burners are useful for foam laminating, dip tanks, hot oil cooking, glass surface treatments, and general air heating.
Горелки газовые INFRAWAVE®
A high-intensity infra-red energy radiates from the high face temperatures of the ceramic refractory grids of an INFRAWAVE® burner. Their design produces a low forward velocity air movement, minimizing disturbances of granular or powder products. Modular designed sections permit tailoring total heat release and radiant pattern to your particular application requirements.
Горелки газовые CYCLOMAX®
The CYCLOMAX® Low NOx Burner provides clean combustion with NOx emission levels below 25 ppm and CO levels less than 75 ppm. Lower emissions may be possible based on application. The integral fan version of this industrial burner is available in 5 sizes, up to 3,700,000 Btu/hr (1080 kW), and the EBMRV version is available in 4 sizes, up to 7,400,000 Btu/hr (2165 kW).
Горелки газовые Circular INCINO-PAK®
Circular INCINO-PAK® Industrial Burners have been specifically designed for the incineration of combustible gaseous effluents inside cylindrical combustion chambers. With INCINO-PAK® direct combustion, higher efficiencies can be achieved than with powered burner systems. The special cone-type COMBUSTIFUME® Natural Gas Burners provide easy outside access to the raw gas pilot, ignitor, and flame monitoring components.
RadMax® ULTRA Low NOx Radiant Line Burners
RadMax® Radiant Low NOx Burners are designed to deliver uniform, high intensity radiant energy for moisture removal in textile and paper ovens, paint drying, and powder coating, as well as many pre-heat, plastic forming, heat treating and annealing operations. With innovative ceramic or metal foam tiles, the RadMax® natural gas burner produces low to Ultra-Low NOx and CO levels for a wide variety of industrial gas burner applications.
NP-RG AIRFLO® Natural Gas Line Burner
MAXON Series "NP" and "RG" AIRFLO® Industrial Burners provide clean, direct fired air heating to optimize process air heating efficiency. The modular natural gas burners install easily with custom built patterns to fit your duct. NP and RG burners burn cleanly with most gaseous fuels and offer high heat releases per foot with wide turndown ratios.
NP-LE LOW EMISSIONS AIRFLO® LOW EMISSIONS Natural Gas Line Burners
The MAXON NP-LE EMISSIONS AIRFLO® Natural Gas Burner is designed for direct-fired make-up air and process applications. This industrial burner provides improved emissions performance over other gas burners with significantly lower levels of CO and NO2. Higher capacities of up to 1,000,000 Btu/hr/ft (300 kW/ft) make NP-LE a more economical solution for your application. The NP-LE Series easily meets ANSI/CSA/CE direct fired industrial heating standards and is available in low pressure versions and in corrosion-proof materials.
LVDT-HC PILOT BURNER
- Stable pilot flame in combination with MAXON AIRFLO® "LV", "HC", DELTA-TE™ and COMBUSTIFUME® burners
- Rugged design
- Burns natural gas, propane and LPG
- Suitable for all kinds of process air heating applications; thermal incinerators, supplementary firing burners etc…
- Complete stainless steel construction
- Plug & play design
- Optimal access for maintenance
- Factory-adjusted, no field refinements required
- Available in different tube lengths up to 13.12 ft
LV AIRFLO® Line Burners
LV AIRFLO® Duct Burners provide high turndown heating with natural gas, propane and many other fuels. The innovative, progressive aeration pattern of the LV adds to system efficiencies by operating on extremely low duct pressure drops reducing overall system horsepower required.